2027 Nissan Murano Oil Filter in Mesa, AZ

Yes, the oil filter is replaced with every oil change on a 2027 Nissan Murano to keep debris from circulating.

As the filter traps particles, it eventually loads and the bypass valve can open, allowing unfiltered oil to flow. That protects oil pressure but quietly increases wear if the filter isn’t renewed. Replacing the filter with fresh oil restores full filtration from the first start and helps maintain engine cleanliness between services.

• New, engine-matched filter installed at each oil service
• Bypass valve risk reduced by starting with clean media
• Better long-term protection for bearings and valve train

The service installs a new engine-matched filter, renews sealing surfaces, refills with the manufacturer-specified oil, and verifies no leaks after a hot run.

Technicians remove the used filter, inspect the gasket land, lubricate the new seal, and torque the filter to specification. After refilling with fresh oil, the engine is started, brought to temperature, and checked for leaks and proper level. This ensures correct sealing and full filtration without triggering the bypass valve.

• Old filter removed; gasket surface cleaned and prepped
• New filter installed; oil refilled to the correct level
• Engine run to temp; final leak and level check completed

The filter can load up, the bypass valve may open, and oil will circulate unfiltered, increasing internal wear over time.

While the engine still receives oil, the debris that fresh media would capture can recirculate and slowly affect bearings, cam surfaces, and timing components. You might not notice immediate symptoms—this is wear that happens in a quiet way. Replacing the filter with each oil change prevents that scenario.

• Higher chance of unfiltered oil once the bypass valve opens
• Gradual internal wear that’s hard to feel early on
• Reduced oil cleanliness and potential performance decline

Yes, the filter is matched to this engine, and filters are not interchangeable across engines even if they look similar.

The correct filter supports proper flow, capture efficiency, and bypass valve calibration for the engine’s displacement and cylinder count. Using a non-matched filter can compromise filtration or oil pressure stability. At service, we install a filter selected for this engine so it performs as designed with the oil grade the manufacturer specifies.

• Engine-matched media and bypass valve characteristics
• Correct gasket size and sealing surface engagement
• Designed for the Murano’s oil flow and pressure needs

It can be done, but it is not recommended because the loaded filter can trigger the bypass valve and circulate unfiltered oil.

Leaving an old filter in place means contaminants trapped in the media stay in the system and flow restriction rises faster. That increases the odds of unfiltered operation between services. Replacing the filter with the oil keeps debris control and oil pressure behavior aligned with how the engine was designed to run.

• Fresh oil plus fresh filter restores full filtration
• Reduces risk of bypass valve opening under load
• Supports consistent protection until the next service

Book online with schedule service or schedule appointment, or call the store to reserve a time.

Online scheduling lets you choose a time, note concerns, and check service specials before you arrive. If you prefer, call and a service advisor will help you plan drop-off and transportation. Bringing your 2027 Nissan Murano to a Nissan facility ensures a filter matched to this engine and a post-service leak check.

• Use schedule service to pick a date and time
• Review service specials before confirming
• Call if you need help coordinating your visit