2025 Nissan Kicks Oil Filter in Mesa, AZ

Yes—the oil filter is replaced with every oil change on a 2025 Nissan Kicks to keep debris from recirculating.

The filter captures particles the oil carries away; as it loads, a bypass valve opens so oil keeps flowing but no longer passes through the media. That means unfiltered oil circulates, which quietly increases wear. Replacing the filter each time removes captured debris with the used oil and resets the system.

• Removes trapped contaminants with the old oil
• Prevents bypass operation from sending unfiltered oil
• Helps maintain stable oil pressure and protection

The service includes removing the old filter, renewing sealing surfaces, installing a correctly matched new filter, adding manufacturer-specified oil, and leak-checking after start-up.

A technician drains the oil, cleans the mounting base, fits and torques the new filter, addresses the drain seal, then refills with the proper oil. The engine is started and inspected for leaks at the filter and drain, and the level is rechecked after circulation.

• Old filter removed; base cleaned and prepped
• New filter installed and drain sealed
• Engine run and leak check performed

The filter can load up and trigger its bypass valve, allowing unfiltered oil to circulate through the engine.

Oil will still flow, but without filtration it carries abrasive particles to bearings and cam surfaces, increasing wear over time. You may not notice symptoms immediately—this is a gradual, avoidable risk. Replacing the filter with the oil prevents this quiet loss of protection.

• Bypass valve opens under restriction
• Unfiltered oil reaches critical components
• Long-term wear increases without obvious early signs

Yes—the filter is matched to this 2.0-liter inline 4-cylinder engine, and filters are not interchangeable across different engines.

Correct fitment ensures the sealing surface, anti-drainback valve, media, and bypass characteristics suit the engine’s design. Using a filter not matched to the 2.0L I-4 risks leaks, poor filtration, or incorrect bypass behavior. Your service advisor will install the proper filter for this engine.

• Designed for the 2.0L inline-4 layout
• Seals and valves matched to the housing
• Bypass pressure tuned for this application

It can be done, but it is not recommended because a loaded filter may send unfiltered oil through the bypass valve.

Leaving the old filter in place leaves trapped debris in the system and increases the chance of bypass operation under restriction. Changing both together clears contaminants and restores full filtration performance for the next interval.

• Old debris remains if the filter is reused
• Bypass risk persists under load
• Best practice is oil and filter together

Book online using schedule service or schedule appointment, or call our Mesa team for help.

Choose a time that fits your day, and we’ll perform the oil and filter replacement with a post-start leak check. Before you arrive, explore service specials for potential savings on maintenance.

• Use schedule service to reserve a time
• Check service specials before you book
• Call {{rooftop.phone}} for scheduling assistance