2022 Nissan Murano Transmission in Mesa, AZ

Common signs include delayed or harsh engagement, slipping under load, shudder at light throttle, drivetrain whine or hum that changes with gear, burnt-smelling or dark fluid, a stored transmission fault code, or a dash warning.

These symptoms point to fluid degradation or possible mechanical wear and should be evaluated promptly. In Mesa’s heat and stop-and-go traffic, issues can compound quickly on a CVT if ignored. Bring your 2022 Nissan Murano to Larry H. Miller Nissan Mesa for an OEM-level inspection and scan-tool check so we can confirm the root cause before recommending service.

• Delayed drive or reverse engagement after shifting
• RPM flares or slipping when accelerating
• Shudder at steady, light throttle or low speeds

No—continued driving with noticeable slip or harsh operation risks escalating a minor service into major transmission damage.

Slipping, shudder, or binding can stem from low/aged fluid, control issues, or internal wear, and driving further can worsen heat and wear in a CVT. Schedule a quick diagnostic so we can check for fault codes, verify fluid condition, and advise the safest next step for your 2022 Nissan Murano.

• Stop driving if the transmission warning light appears
• Document when the symptom happens (speed, load, temperature)
• Schedule service for diagnosis

The right choice depends on your Murano’s service history and current fluid condition after an inspection.

A drain-and-fill replaces only the fluid accessible at the pan, while a full exchange replaces a much larger share of the total system volume. Because CVTs are sensitive to fluid quality and temperature, we inspect fluid color/odor, check for stored codes, and then recommend the most appropriate approach for your 2022 Nissan Murano.

• Drain-and-fill: lower cost, partial fluid refresh
• Full exchange: broader refresh when condition supports it
• We inspect first; we do not default to the more expensive option

Dealers follow the factory fill procedures and use the manufacturer-specified fluid; independents may offer lower labor rates but can vary in CVT-specific tooling and processes.

For a 2022 Nissan Murano’s CVT, accurate fluid temperature, level-setting, and scan-tool procedures matter. Larry H. Miller Nissan Mesa stocks the OEM-specified fluid and follows Nissan’s service steps. Choose the option that balances cost, parts quality, and process accuracy for your needs.

• OEM-specified fluid and procedures for Nissan CVTs
• Scan-tool checks for temperature, level, and fault codes
• Compare labor rates and what’s included before deciding

The official interval is set by Nissan’s maintenance schedule for this model, and we follow that guidance after inspecting fluid condition.

Intervals can differ by driving profile, especially with heat, stop-and-go commuting, sustained grades, or towing common in the Phoenix East Valley. We can review your 2022 Nissan Murano’s history, check fluid condition, and align service timing with Nissan’s guidance and your usage.

• We verify fluid condition before recommending timing
• Local heat and traffic can shorten real-world intervals
• Schedule service to review your plan

Service time depends on the selected procedure (inspection-only, drain-and-fill, or full exchange) and what our initial checks find.

We begin with a fluid condition and level check, then advise on the appropriate service for your Murano’s CVT. If diagnostics or additional repairs are needed, timing can adjust. Use online check-in so we can plan your visit efficiently at Larry H. Miller Nissan Mesa.

• Inspection first; service time set after evaluation
• Added diagnostics may extend visit length
• Schedule appointment for availability

A proper CVT service includes inspection, scan-tool checks, the selected fluid replacement method, correct fluid-temperature level set, and a confirming road test.

Your 2022 Nissan Murano benefits from methodical steps that respect Nissan CVT requirements. We confirm fluid condition, look for stored transmission codes, perform the chosen service (drain-and-fill or exchange), and verify level at the prescribed temperature before road-testing to confirm shift quality.

• Fluid condition/level inspection and fault-code scan
• Drain-and-fill or exchange as appropriate
• Level set at spec temperature and verification road test

Larry H. Miller Nissan Mesa services 2022 Nissan Murano models for the Phoenix East Valley and Greater Phoenix metro area.

We serve Mesa, Tempe, Scottsdale, Chandler, Gilbert, and Phoenix with factory-authorized Nissan service. Our location at 2025 W Riverview Auto Dr, Mesa, AZ 85201 is just off the Loop 202 and Dobson Road. Check our current service specials and book online.

• Mesa address with easy Loop 202 access
• Factory-authorized Nissan service for CVTs
• Schedule service online 24/7

Larry H. Miller Nissan Mesa serves the Phoenix East Valley and Greater Phoenix metro area—including Mesa, Tempe, Scottsdale, Chandler, Gilbert, and Phoenix—with transmission care tailored to local conditions. Heat is the primary killer of automatic transmission fluid, and Arizona’s high ambient temperatures and stop-and-go traffic can accelerate fluid degradation in a CVT. If you tow or frequently climb sustained grades, inspections become even more important for a 2022 Nissan Murano. Use our online scheduler for a convenient visit, or stop by our modern facility at 2025 W Riverview Auto Dr, Mesa, AZ 85201. We’ll verify fluid condition, check for codes, and recommend the right service for your driving profile. For directions or questions, contact our team or schedule service now.

The 2022 Nissan Murano is equipped with an automatic, continuously variable transmission (CVT). For service accuracy and longevity, we use the manufacturer-specified fluid for this transmission and follow Nissan’s fill and temperature procedures. When evaluating your Murano, our technicians inspect fluid condition and verify level before recommending either a drain-and-fill or a full exchange. We also perform scan-tool checks to identify any stored transmission fault codes that may inform next steps. Bring your 2022 Nissan Murano to Larry H. Miller Nissan Mesa in Mesa for an OEM-spec transmission service — schedule service.

For the 2022 Nissan Murano’s CVT, our process starts with a fluid condition and level check, followed by a scan for transmission-related fault codes. Based on what we find, we’ll complete either a drain-and-fill (partial refresh) or a full exchange, then set the fluid level at the correct temperature using factory procedures and complete a road test to confirm shift quality. This disciplined approach aligns with Nissan’s service guidance and helps protect transmission longevity in Arizona conditions. Check current service specials and schedule service online.