2022 Nissan Murano Oil Filter in Mesa, AZ

Yes—the oil filter is replaced with the oil so the engine doesn’t run on a loaded filter or trigger the bypass valve.

The filter holds debris captured from the last interval; leaving it in place reduces flow and can route unfiltered oil once the bypass opens. The manufacturer’s schedule and your driving conditions determine timing, but the service pairs both items together for full restoration of filtration capacity.

• Prevents the bypass valve from circulating unfiltered oil
• Restores proper oil flow and pressure stability
• Removes trapped debris from the prior interval

The old filter is removed, sealing surfaces are cleaned, a matched new filter is installed, and the engine is run and checked for leaks.

This is performed alongside an oil change using the oil grade the manufacturer specifies for this engine. After installation, the V6 is started so we can inspect the filter base and drain plug for seepage, confirm the final oil level, and reset the maintenance reminder if applicable.

• Filter matched to the Murano’s engine
• Fresh gasket and properly torqued fitment
• Post‑start leak check and level verification

The filter can load up, increasing restriction until the bypass valve opens and your engine circulates unfiltered oil.

Unfiltered oil still lubricates, but fine particles keep recirculating, quietly accelerating wear over time. You may not see a warning light. Replacing the filter with the oil restores debris‑holding capacity and helps maintain stable pressure and flow to critical parts.

• Increased internal wear from recirculated particles
• Potential pressure fluctuations under load
• No obvious symptoms until damage accumulates

Yes—the filter is matched to the 3.5‑liter, six‑cylinder engine and filters are not interchangeable across engines.

Correct fit ensures proper gasket sealing, anti‑drainback performance, and bypass valve calibration. Using a non‑matched filter risks leaks, incorrect flow, or unfiltered circulation. We install a filter that meets the 3.5L V6’s requirements without listing part numbers or specs.

• Designed for the Murano’s 3.5L V6 architecture
• Correct gasket size and thread engagement
• Bypass and flow characteristics appropriate to this engine

It can be done, but it’s not recommended because the loaded filter can force the bypass valve to send unfiltered oil through the engine.

Leaving old debris in the system undermines the benefit of fresh oil. For balanced protection, change the oil and filter together according to the manufacturer’s maintenance schedule and your driving conditions.

• Avoids running fresh oil through a saturated filter
• Maintains proper flow and pressure stability
• Resets the filter’s debris‑holding capacity

Use our online tool to schedule appointment or call the store for availability.

Pick a time that fits your day, and check current service specials before you confirm. If you have questions about your 2022 Nissan Murano’s service timing, we can review your mileage and driving conditions and suggest next steps.

• Book online in minutes
• See available times and transportation options
• Apply any eligible specials at checkout