2021 Nissan Murano Oil Filter in Mesa, AZ

Yes—replacing the oil filter at each oil change is standard practice and protects the engine best.

The manufacturer’s maintenance schedule sets the interval for your vehicle, but pairing the filter with every oil change prevents the bypass valve from sending unfiltered oil through the engine when the filter loads up. That quiet, unfiltered circulation accelerates wear even though pressure looks normal. Doing both together keeps filtration capacity and oil quality aligned.

• Fresh filter restores debris-holding capacity.
• Bypass risk is minimized after replacement.
• Service history stays simple and consistent.

The old filter is removed, sealing surfaces are renewed, a correct engine-matched filter is installed, and the system is checked for leaks after running.

During an oil and filter service, we drain the used oil, fit a new gasketed filter matched to the 3.5‑liter V6, reinstall the drain plug with a fresh seal as needed, and refill with the oil grade the manufacturer specifies for this engine. We start the Murano, verify pressure, and inspect for leaks before resetting the maintenance reminder.

• Correct filter matched to the 3.5‑liter V6.
• New drain plug seal and post-run leak check.
• Maintenance reminder reset and proper disposal.

The filter can load up, the bypass valve can open, and unfiltered oil will circulate, increasing internal wear over time.

Oil pressure may still look normal because the bypass maintains flow, but that flow is not being cleaned. Dirt and metallic particles can recirculate, subtly wearing bearings and valve-train parts. Replacing the filter at each oil change keeps debris capacity high and helps the lubrication system protect the engine as intended.

• Bypass flow means oil is not filtered.
• Wear increases quietly, not dramatically.
• Timely filter changes prevent this scenario.

Yes—the filter is matched to the 3.5‑liter, six‑cylinder engine and filters are not interchangeable across engines.

The 2021 Nissan Murano’s 3.5‑liter V6 (3498 cc) uses a filter designed for its oil flow and sealing surfaces. Using a non-matching filter can compromise sealing, flow, or filtration performance. We install a filter that matches this engine’s specification without listing a part number, ensuring proper fit and function with the oil grade the manufacturer specifies for this engine.

• Correct fit prevents leaks at the seal.
• Proper media and flow suit the V6’s needs.
• Designed to work with the engine’s bypass system.

It can be done, but it is not recommended because the used filter may trigger bypass flow and circulate unfiltered oil.

The service interval for your vehicle is set by the manufacturer, but best practice is to replace the filter with the oil so filtration capacity matches the fresh oil’s service life. Keeping an old filter invites unfiltered circulation once it loads, which increases long-term wear even if oil pressure appears normal.

• Pairing oil and filter keeps protection aligned.
• Reduces risk of bypass operation.
• Simplifies service records and planning.

Use schedule service or schedule appointment to book online, or call us for help setting your 2021 Nissan Murano visit.

Choose a time that works, add your 2021 Nissan Murano details, and we’ll prepare the correct filter and oil grade the manufacturer specifies for this engine. You can also review current service specials before confirming. If you prefer, call {{rooftop.phone}} and our team in Mesa will assist you.

• Click schedule service to pick a date and time.
• Enter vehicle info for accurate preparation.
• Check service specials before you confirm.