2021 Nissan Kicks Oil Filter in Mesa, AZ

Yes—the oil filter is replaced with every oil change to keep new oil from circulating through a loaded filter.

The filter holds debris the oil carries away; once it loads, the bypass valve opens and oil flows unfiltered. Replacing the filter each time prevents contaminants from recirculating and quietly increasing wear. Follow the manufacturer’s schedule and your driving conditions to determine timing.

• New oil paired with a fresh, matching filter
• Bypass risk reduced by replacing the loaded element
• Consistent oil pressure and filtration performance

The old filter is removed, sealing surfaces are renewed, a matched new filter is installed, and the engine is leak-checked after refill and run-up.

This service occurs during an oil change on the 2021 Nissan Kicks. The gasket is replaced or conditioned as needed, the drain plug seal is addressed, and the engine is started to confirm oil pressure and verify no leaks at the filter base or drain. It completes with level checks and a maintenance reminder reset when applicable.

• Remove old filter and install a matched replacement
• Renew seals and address the drain plug sealing surface
• Run, inspect, and verify no leaks

A loaded filter can trigger the bypass valve, letting oil circulate unfiltered and allowing abrasive particles to keep moving through the engine.

Unfiltered oil doesn’t halt lubrication, but it quietly increases wear across bearings and cam surfaces. Over time, this can affect performance and longevity. Replacing the filter with each oil change prevents recirculation of trapped debris and helps maintain stable oil pressure.

• Bypass opens when the filter media loads
• Oil flows, but filtration is skipped
• Increased long-term component wear risk

Yes—the filter is matched to the 1.6-liter inline 4-cylinder engine, and filters are not interchangeable across engines.

Correct fit and valve characteristics ensure proper sealing, flow, and bypass behavior on the 2021 Nissan Kicks. Using a non-matched filter can compromise filtration and leak integrity. We install a filter that fits this engine’s specification without naming a part number.

• Designed for the 1.6L inline 4-cylinder layout
• Correct sealing surface and thread design
• Proper bypass valve calibration for this engine

It can, but it’s not recommended because a used filter can send unfiltered oil through the bypass valve.

New oil poured through a loaded filter won’t stay clean for long, and once the media is saturated, unfiltered oil circulates. Replacing both together preserves the oil’s protective qualities and supports consistent pressure. Follow the maintenance schedule and driving conditions to plan your service cadence.

• Protects new oil from immediate contamination
• Helps maintain stable oil pressure
• Reduces long-term engine wear

Use our online portal to schedule service or call the Mesa team directly.

It’s quick to choose a time, note concerns, and view available service specials before you arrive. If you prefer to speak with an advisor, call {{rooftop.phone}}. You can schedule service anytime.

• Book online via our scheduler
• See current offers before you visit
• Call for advisor assistance in Mesa