2021 Nissan GT-R Oil Filter in Mesa, AZ

Yes—the oil filter is replaced with the oil because a loaded filter can trigger the bypass valve and circulate unfiltered oil.

The manufacturer’s schedule and your driving conditions determine timing, but the service pairs oil and filter together. In Mesa’s heat and stop‑and‑go traffic, oil degrades faster and the filter accumulates debris sooner. Replacing both restores filtration and the correct oil chemistry in one visit.

• Prevents bypass operation that sends unfiltered oil through the engine
• Restores proper sealing at the filter base and drain plug
• Resets maintenance tracking with one complete service

The service installs a filter matched to this engine, renews sealing surfaces, fills with the specified oil grade, runs the engine, and checks for leaks.

Technicians remove the used filter, clean and prep the gasket surfaces, and install the new unit to spec. Fresh oil is added, the GT-R is started to build pressure, and a final inspection confirms there are no leaks at the filter or drain plug. Levels are verified before return.

• Engine‑matched filter installed with a new gasket seal
• Fresh oil of the manufacturer‑specified grade
• Post‑service pressure run and visual leak check

The filter can load with debris, open its bypass valve, and circulate unfiltered oil—quietly increasing wear over time.

Oil still flows, but it may no longer be filtered when the bypass opens. That allows abrasive particles to recirculate through bearings and turbo oil passages. Replacing the filter when you change the oil prevents this and maintains consistent protection.

• Higher risk of abrasive particles reaching precision components
• Less stable oil pressure and potential seepage at old seals
• Shortened service life of lubricated parts over time

Yes—the filter is matched to this 3.8‑liter, 6‑cylinder engine and filters are not interchangeable across engines.

Correct fit ensures proper sealing, flow rate, and bypass calibration for the GT-R’s V6. Using a non‑matched filter can compromise filtration or sealing and increase the chance of unfiltered oil if a bypass event occurs. Always use a filter designed for this displacement and configuration.

• Engine‑specific fitment and gasket dimensions
• Bypass valve calibrated for this oiling system
• Flow characteristics suited to a twin‑turbo V6

It can be done, but it’s not recommended because an old filter can bypass and send unfiltered oil through the engine.

The safe, standard practice is to replace both together so filtration and lubrication are restored at the same time. Skipping the filter leaves old debris in the system and risks the bypass opening under load. Pairing both services helps protect the GT-R’s internals.

• Maintains full filtration and correct oil chemistry
• Reduces risk of leaks from aged seals
• Resets maintenance timing to a single interval

Use our online portal to schedule service or call our Mesa team for assistance.

Pick a time, note your 2021 Nissan GT-R, and we’ll handle the rest. Check service specials before you book, and if you prefer, you can also schedule appointment from your phone. Our advisors confirm details and answer questions.

• Fast online booking with preferred dates and times
• Option to discuss needs with a service advisor
• Access to current Mesa service specials before checkout