2019 Nissan Sentra Tires in Mesa, AZ

The published maintenance schedule for this model calls for wheel and tire rotation every 5,000 miles. Regular visits also create an opportunity to compare wear across all four tires and identify concerns early.

• Rotation helps manage different wear rates at each corner.
• Tread depth is measured on all four tires during service.
• Pressure is set to the vehicle placard specification afterward.

The inspection can identify uneven wear, a tread-depth indicator at the tread surface, or other conditions that may call for replacement or further evaluation. Recommendations are based on what the tires show during the visit.

• All four tires receive a tread-depth measurement.
• Rotation follows the drivetrain and tires fitted.
• Pressure and the monitoring system are addressed after rotation.

Directional tread and staggered fitments can change how tires may be moved. The tire design and vehicle configuration should be checked before rotation so each tire is placed where it can be used correctly.

• Directional tread can limit movement between sides.
• Staggered fitments can limit movement between axles.
• The manufacturer-specified pattern guides the final placement.

An inspection determines whether one tire, an axle set, or the complete set is the appropriate choice. On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why replacement decisions differ from those for a two-wheel-drive vehicle. The tires actually fitted and the vehicle’s service history help determine the recommendation.

• Compare tread depth across all four tires.
• Look for uneven wear or visible damage.
• Match the replacement decision to the drivetrain and fitted tires.

Drivers may first notice vibration at highway speed, uneven tread wear, or a tire pressure warning. A technician can measure all four tires and compare their condition before recommending replacement or continued service.

• Check whether a molded tread indicator is level with the tread.
• Use the penny test as a general check.
• Have vibration or uneven wear evaluated during tire service.

The dealership’s certified Nissan Service Center is located at 2025 W Riverview Auto Dr, Mesa, AZ 85201, just off the Loop 202 and Dobson Road. Booking covers tread-depth measurement and a rotation or replacement recommendation based on what the inspection finds.

• Request tire inspection and rotation service.
• Bring forward concerns such as vibration or uneven wear.
• Use the online scheduler or call the Mesa service team.