2018 Nissan Murano Oil Filter in Mesa, AZ

Yes, the oil filter is replaced at each oil change to ensure the 2018 Nissan Murano receives consistently filtered oil.

The filter captures debris until it loads, at which point the bypass valve can open and circulate unfiltered oil. Replacing the filter with the oil maintains proper flow and filtration for your 3.5L V6. The exact timing follows the manufacturer’s maintenance schedule and your driving conditions. Book online to align service with your usage.

• Prevents bypass operation from circulating unfiltered oil
• Maintains stable oil pressure and flow
• Matches the filter to this engine at every service

The service includes removing the old filter and gasket, installing a matched new filter, renewing sealing surfaces, refilling oil, warming the engine, and checking for leaks.

Technicians verify the filter base is clean and the new gasket is seated evenly. After filling with the oil grade the manufacturer specifies for this engine, the engine is run to operating temperature and inspected for leaks at the filter and drain plug. The final step is confirming the oil level and resetting the reminder if applicable.

• Filter and gasket replaced and seated correctly
• Oil refilled to the proper level and verified
• Post‑warmup leak inspection completed

A loaded filter can trigger the bypass valve, sending unfiltered oil through the engine and quietly increasing wear.

Unfiltered oil carries abrasive particles to bearings, cams, and timing components, reducing long‑term protection. You may not notice immediate symptoms because flow continues, but it is the wrong kind of flow. Replacing the filter with the oil prevents the bypass from becoming the norm. Follow the manufacturer’s schedule and your usage pattern.

• Increased internal wear over time
• Potential for sludge formation
• Less effective protection during hot conditions

Yes, the filter is matched to the 3.5‑liter V‑6 engine, and oil filters are not interchangeable across engines.

Proper fit ensures correct sealing, flow rate, and bypass characteristics for this displacement and cylinder count. Using a non‑matched filter can affect oil pressure and filtration, especially in high‑heat Mesa driving. We install a filter that meets the engine’s requirements without naming a part number or specification.

• Correct gasket size and thread engagement
• Bypass valve calibrated for this engine
• Flow capacity suited to a 3.5L V6

It can be done, but it is not recommended because a partially loaded filter may send unfiltered oil through the bypass valve.

Skipping the filter leaves debris trapped from the prior interval, undermining the benefit of fresh oil. The best practice is to replace oil and filter together per the manufacturer’s schedule. This keeps pressure stable and filtration effective through the whole interval.

• Ensures fresh media for the new oil
• Reduces bypass operation risk
• Supports consistent engine protection

Use the online portal to schedule service or call {{rooftop.phone}} for assistance.

Choose a time, add your 2018 Nissan Murano details, and review available service specials before confirming. The appointment page makes it easy to align maintenance with your driving habits around the Phoenix East Valley. You’ll receive confirmation and reminders.

• Instant appointment selection online
• Access to current service offers
• Clear drop‑off instructions and contact options