2018 Nissan GT-R Oil Filter in Mesa, AZ

Yes, the oil filter should be replaced at the same time the oil is changed on a 2018 Nissan GT-R.

Replacing both together ensures the new oil is immediately protected by fresh filtration media. If the old filter is left in place, the bypass valve can open sooner and allow unfiltered oil to circulate, which quietly increases wear. Follow the manufacturer’s schedule and service history to time your visits appropriately.

• New filter prevents debris from contaminating fresh oil
• Bypass risk is minimized with a fresh element
• Service intervals are determined by the manufacturer and use conditions

The service includes removing the old filter, installing a matched new filter, renewing sealing surfaces, refilling with the specified oil grade, and a post-run leak check.

A technician drains the used oil, replaces the filter and gasket/O-ring, cleans mating surfaces, reinstalls the drain plug with its sealing surface renewed, and refills with the oil grade the manufacturer specifies for this engine. The engine is run to temperature and inspected for leaks.

• Drain oil and remove old filter
• Install matched filter; renew gaskets/seals
• Run engine and verify no leaks; confirm level

A loaded filter can trigger its bypass valve, letting unfiltered oil circulate and increasing engine wear over time.

While the engine still receives oil, it may not be filtered, which undermines protection for bearings, camshafts, and turbocharger supply lines. Debris can recirculate and accelerate wear in a way that’s easy to miss until problems surface. Replacing the filter with the oil preserves consistent filtration and oil pressure.

• Bypass flow sends unfiltered oil through the engine
• Microscopic debris recirculates and increases wear
• Protection and oil pressure stability can decline

Yes, the filter is matched to the 3.8‑liter, 6‑cylinder engine and filters are not interchangeable across different engines.

The correct filter ensures proper fit, sealing, flow rate, and debris-holding capacity for this powertrain. Using an incorrect filter risks poor sealing, early bypass, or restricted flow. Your technician installs a filter that matches this engine’s requirements without naming a part number.

• Designed for 3.8L V6 flow and pressure characteristics
• Correct gasket and thread ensure a reliable seal
• Media capacity aligned with the engine’s output and heat

It can be done, but it isn’t recommended because the old filter can send unfiltered oil through the bypass valve.

Skipping the filter undermines the benefits of fresh oil, especially in high-heat, stop‑and‑go East Valley driving. The manufacturer’s schedule and your service history should guide timing, but pairing oil and filter is the protective standard.

• Fresh oil deserves fresh filtration media
• Reduces risk of early bypass and debris recirculation
• Keeps protection consistent between services

Use our online portal to schedule service or call the store for assistance.

Pick a time that fits your day, add notes about your 2018 Nissan GT-R, and check service specials before you confirm. If you prefer, call the service team to coordinate drop-off and transportation options.

• Book online in minutes via the scheduler
• Review current dealer service specials
• Get help by phone if you have questions