2017 Nissan Maxima Brake Pads in Mesa, AZ

Squealing, grinding, longer stopping distances, a soft or vibrating pedal, and a brake warning light indicate the pads should be inspected and likely replaced.

Grinding means the friction material is gone and the backing plate is contacting the rotor—stop driving and book service. Because brakes wear as a system, pads, rotors, hardware, and fluid should be assessed together to avoid premature wear of new parts. An inspection will pinpoint which components need attention now.

• Squeal or chirp at low speeds
• Grinding or scraping under braking
• Steering wheel or pedal vibration when stopping

Technicians measure pad wear, inspect rotors and hardware, replace worn pads with parts matched to your vehicle, service slides, assess fluid, and road‑test the 2017 Nissan Maxima.

Rotors are checked for thickness and surface condition to determine if resurfacing or replacement is appropriate. Caliper operation and hose condition are verified, and hardware is cleaned or renewed as needed. Proper lug torque and a final test drive confirm quiet operation and consistent pedal feel.

• Pad measurement and rotor inspection
• Pad replacement and slide/lubrication service
• Brake fluid level check and final road test

Pad life depends on how and where you drive; measurement during inspection is the only reliable way to know remaining life.

City traffic, hills, hard stops, hot weather, and spirited driving wear pads faster than steady highway cruising. Using the 2017 Nissan Maxima for frequent short trips or heavy loads also increases wear. Regular inspections catch changes early and help plan replacement before rotors are damaged.

• Driving style and route determine wear rate
• Measurement, not a preset mileage, answers lifespan
• Inspections prevent rotor damage and noise

Rotors are replaced or resurfaced only if inspection shows they are below spec, damaged, or uneven; otherwise, they may remain in service.

During pad replacement, rotor thickness and surface condition are checked against specifications. Installing new pads on scored or warped rotors can cause noise, vibration, and faster pad wear. Evaluating pads, rotors, and hardware together ensures the new pads bed in correctly and braking remains smooth.

• Measure rotor thickness and runout
• Resurface or replace if out of spec
• Keep system components matched for best results

No—worn pads reduce braking power, and grinding means metal‑to‑metal contact that can damage rotors; book service immediately.

Continuing to drive can increase stopping distance and trigger pulsation, pulling, or ABS activation at lower thresholds. Replacing one component while ignoring others often shortens the life of the new part, so a system inspection is the safest approach.

• Grinding = stop driving and schedule service
• Extended wear risks rotor damage
• System inspection restores safe braking

Use our online portal to schedule service or schedule an appointment, or call the service team for assistance.

Pick a time that fits your day, and check current service specials before you arrive. Our team will inspect pads, rotors, hardware, and fluid on your 2017 Nissan Maxima and provide clear next steps.

• Schedule service in minutes
• Review service specials before you book
• Call {{rooftop.phone}} for help