2014 Nissan 370z Tires in Mesa, AZ

The manufacturer’s maintenance schedule for this model year does not set an interval in the service guidance used here. Regular inspections remain useful because wear can vary between the front and rear axles on a rear-wheel-drive vehicle. Service history and the condition of the tires fitted help determine the next visit.

• Ask for tread-depth measurement on all four tires.
• Have uneven wear or vibration checked during service.
• Follow the manufacturer’s schedule when it applies.

The rotation follows the pattern the manufacturer specifies for this rear-wheel-drive vehicle. The inspection also gives the technician a basis for recommending rotation or replacement from the tire condition found. No tire size or pressure value is needed to complete this assessment.

• All-four-tire tread-depth measurement.
• Rotation according to the applicable drivetrain pattern.
• Pressure adjustment and monitoring-system reset.

Because the 2014 Nissan 370Z is rear-wheel drive, the rear axle receives engine power and may wear differently from the front axle. The tires themselves must also be inspected before movement is recommended. A service professional can confirm the suitable arrangement without assuming a pattern that may not match the fitted tires.

• Confirm that the vehicle uses rear-wheel drive.
• Check whether the tread is directional.
• Inspect for a staggered fitment before rotating.

Unlike an all-wheel-drive vehicle, this Nissan does not require matching tread depth across all four tires to protect an all-wheel-drive system. Even so, differences in tread condition can affect handling and balance. Tread depth, wear pattern, damage, and the vehicle’s service history determine whether one tire, an axle pair, or the complete set is appropriate.

• Inspect all four tires before choosing replacements.
• Compare tread condition between the front and rear axles.
• Consider the fitted tires and service history.

Uneven tread wear and vibration at highway speed are also reasons to have the tires inspected rather than continuing to drive without an assessment. Measuring all four tires shows whether the concern is isolated or affects the set. The replacement recommendation depends on what the service inspection finds.

• Look for a tread-depth indicator level with the tread.
• Use a penny test as a general tread check.
• Request an inspection for vibration or uneven wear.

The dealership’s certified Nissan Service Center is at 2025 W Riverview Auto Dr, Mesa, AZ 85201. Booking a tire visit gets tread depth measured on all four tires and a rotation or replacement recommendation based on what is found. You can also review current service specials before scheduling.

• Choose a service appointment online.
• Call the Mesa service team directly.
• Request tire inspection and rotation service.