2010 Nissan Versa Oil Change in Mesa, AZ

Nissan specifies 5W-30 engine oil that meets current API standards for the 2010 Nissan Versa.

Using the correct viscosity helps the 1.6L inline-4 (107 hp) lubricate quickly at start-up and protect under Arizona heat. Full synthetic or high-quality conventional that meets the latest API spec is acceptable; follow the owner’s manual guidance. Our Mesa Service Center installs OEM-spec oil and a Nissan-approved filter for consistent protection.

• Viscosity: 5W-30 (per Nissan specification)
• Meets current API category (SN/SN Plus/SP or newer)
• Installed with a Nissan-approved oil filter

The 2010 Nissan Versa 1.6L typically requires about 3.7 quarts of oil with filter.

Capacity can vary slightly by filter and drain time, so technicians always fill, run, and top off to the proper dipstick level. In Mesa’s hot, dusty climate, keeping oil at the correct level supports cooling and protection in stop-and-go traffic. During each service, we verify level and condition before returning your vehicle.

• Approximate capacity: ~3.7 quarts with filter
• Level verified on dipstick after warm run-in
• Proper fill supports longevity of the 1.6L engine

Under normal driving, change oil about every 7,500 miles; under severe conditions, every 3,750 miles.

Severe service includes frequent short trips, high heat, dusty roads, and heavy traffic—common across the Phoenix East Valley. If your Versa sees these conditions, use the 3,750-mile interval to maintain protection and warranty compliance. Our advisors can help you tailor an interval to your Mesa driving profile.

• Normal interval: ~7,500 miles
• Severe interval: ~3,750 miles
• Adjust based on heat, dust, and stop-and-go driving

Yes—dealer service includes OEM-spec oil and a Nissan-approved filter installed by factory-trained technicians.

Quick-lube shops can be convenient, but our Mesa team follows Nissan procedures and checks for TSBs and recalls applicable to your 2010 Versa. You also receive a multi-point inspection and proper fluid disposal. Choose the option that fits your needs; we provide up-front quotes and documented service records.

• OEM-spec oil and Nissan-approved filter
• Multi-point inspection and service record documentation
• Performed by Nissan-trained technicians

Full synthetic offers the best high-temperature stability and oxidation resistance, especially in Arizona heat.

Conventional oil meets baseline specs but can shear and oxidize faster in severe heat and dust. Synthetic blends improve stability and cold-start flow. Full synthetic maintains viscosity across temperatures, which benefits Mesa’s summer conditions and frequent stop-and-go driving.

• Conventional: budget-friendly, faster breakdown in heat
• Synthetic blend: midpoint in protection and cost
• Full synthetic: best thermal stability and deposit control

Skipping required oil changes can jeopardize warranty coverage if a related failure occurs.

Manufacturers require maintenance at prescribed intervals and proof of service. Keep dated receipts and mileage records, and use oil that meets Nissan’s specifications. Warranty work generally requires a certified facility, and documented oil services protect your coverage.

• Follow Nissan’s interval (normal vs. severe)
• Keep receipts and mileage documentation
• Use oil meeting Nissan’s API spec

A typical 2010 Nissan Versa oil change takes about 45–60 minutes, including inspection.

Time can vary with shop load and whether you request a rotation or additional services. Our Mesa location offers online check-in and efficient write-up to keep you moving. For the quickest visit, schedule an appointment in advance.

• Estimated in-bay time: ~45–60 minutes
• Allow extra time for peak hours or added services
• Book ahead for fastest turnaround

Pricing varies by oil type and filter; request an up-front quote from Larry H. Miller Nissan Mesa.

Costs differ for conventional, synthetic blend, and full synthetic, and may be reduced with current service specials. Every quote includes Nissan-spec oil and filter, multi-point inspection, and proper disposal—no surprises. Use our online tool to schedule service and receive transparent pricing.

• Up-front, line-item estimates provided
• Oil type influences final price
• Check dealer service specials for savings

Every 2010 Nissan Versa oil service in Mesa follows a clear, OEM-based process. We verify VIN and mileage, then safely lift the vehicle and remove the drain plug and filter. After full drain, we install a Nissan-approved filter and fill with 5W-30 oil that meets current API standards, then run and top off to the correct level. A multi-point inspection checks tires, brakes, battery, belts, hoses, and visible leaks. Fluids are topped off and tire pressures set to spec. You’ll receive a digital or printed report with recommendations and future intervals. Want to save time? Use our online portal to schedule service and review service specials before you arrive.

The 2010 Nissan Versa with the 1.6L inline-4 is designed for 5W-30 engine oil meeting current API categories. Typical capacity is about 3.7 quarts with filter, though technicians confirm the final level on the dipstick after a warm run-in. For most drivers, aim for an oil change about every 7,500 miles; if you encounter severe conditions like high heat, dust, frequent short trips, or heavy traffic, shorten that to around 3,750 miles. Using a Nissan-approved oil filter helps maintain proper flow and filtration. No widespread oil-related TSBs are noted for the 1.6L when maintained on schedule. Bring your 2010 Nissan Versa to Larry H. Miller Nissan Mesa in Mesa for an OEM-spec oil change — schedule service.

LHM Nissan Mesa serves the Phoenix East Valley and Greater Phoenix metro area—including Mesa, Tempe, Scottsdale, Chandler, Gilbert, and Phoenix. Our climate brings extreme summer heat and desert dust, both of which accelerate oil oxidation and filtration load; severe-duty intervals are often appropriate for city traffic along Loop 202 and surface streets. Certified Nissan technicians perform each service using dealership-grade equipment and OEM procedures, then document findings for your records. We’re easy to reach at 2025 W Riverview Auto Dr, just off Loop 202 and Dobson Road. Ready to plan your visit? Schedule an appointment or check service specials before you arrive.